Modeling the Impacts of Local Factors for Healthcare Building Energy Performance Improvement in Thailand
DOI:
https://doi.org/10.21834/aje-bs.v3i8.288Keywords:
Local Factors in Construction, Energy Performance Improvement, Generalizable Healthcare Building Design, Integrated Building DesignAbstract
This research aims to perform, compare, and evaluate Integrated Building Design (IBD) processes, collaborating the Building Information Modeling (BIM) with Building Performance Simulation (BPS) applications to perform energy analysis and to improve the building energy performance of a Generalizable Building Design (GBD), a universal application on health care facilities design in Thailand. The IBD processes produce the simulation results in a harmonious direction. Slight variation in building orientation could alter the extent of energy consumption. The integration of the three measures could minimize energy consumption greatly. The study addresses the limitations of the IBDs in the software integration processes.
References
Autodesk. (2010). Revit Architecture 2011 User’s Guide. Available from http://images.autodesk.com/adsk/files/revit_architecture_2011_user_guide_en.pdf
Attia, S. G., & De Herde, A. (2011). Early Design Simulation Tools for Net Zero Energy Buildings: A Comparison of Ten Tools. Paper presented at the 12th Conference of International Building Performance Simulation Association, Building Simulation 2011, Sydney, Australia.
Department of Alternative Energy Development and Efficiency. (2009). Ministry of Energy’s notification on Criteria and Calculation Methods for Building Design of Various Systems, Overall Energy Consumption of Buildings and Use of Renewable Energy of Various Building Systems B.E. 2552. Available from http://www2.dede.go.th/km_berc/downloads/
Eastman, C., Teicholz, P., Sacks, R., and Liston, K. (2008). BIM Handbook: A guide to Building Information Modeling for owners, managers, designers, engineers, and contractors. New Jersey: John Wiley & Sons, Inc. DOI: https://doi.org/10.1002/9780470261309
Energy Efficiency and Renewable Energy, U.S. Department of Energy. (2011). Weather Data. Available from http://apps1.eere.energy.gov/buildings/energyplus/weatherdata_format.cfm
Integrated Environmental Solutions. (2009). BIM + Building Performance Analysis Using Revit 2010 and IES . Available from http://www.iesve.com.
Krygiel, E., and Nies, B. (2008). Green BIM: Successful Sustainable Design with Building Information Modeling. Indianapolis: Wiley Publishing, Inc.
Krygiel, E., Read, P., and Vandezande, J. (2010). Mastering Autodesk Revit Architecture 2011. Indianapolis: Wiley Publishing, Inc.
Treldal, N. (2008). Integrated Data and Process Control During BIM Design. Available from http://www.coinsweb.nl/downloads.
U.S. Department of Energy. (2001). Greening Federal Facilities: an energy, enivironmental, and economic resource guide for federal facility managers and designers. Available from http://www1.eere.energy.gov/.
World Climate. (2011). Bangkok, Thailand:Climate, Global Warming, and Daylight Charts and Data. Available from http://www.climate-charts.com/Countries/Thailand.html
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Nuttasit Somboonwit, Nopadon Sahachaisaeree
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
